The Pros and Cons of Motorcycle Exhaust Wraps

If you’ve ever seen a motorcycle with exhaust pipes that are wrapped in what looks like shiny black tape, you might have wondered what that was all about. It turns out, there’s a good reason for wrapping those pipes – and it has to do with preventing heat damage.


But there are also some potential drawbacks to using exhaust wraps, so it’s important to weigh the pros and cons before making a decision about whether or not to use them on your own bike.

Here’s a look at some of the key points to consider when deciding on motorcycle exhaust wraps.

The Pros

Reduces Engine Temperature

One of the main benefits of exhaust wraps is that they help to reduce engine temperature. By trapping heat inside the pipes, they prevent it from radiating out into the surrounding area. This can help to improve your bike’s overall performance, as well as extend its lifespan by protecting sensitive components from heat damage.

While reducing engine temperature is the main benefit of exhaust wraps, they can also help to improve your bike’s power and performance. By trapping heat inside the pipes, they make the engine work harder, which can lead to an increase in power output. Additionally, the wrapped pipes will act as a muffler, reducing noise output and making your ride more pleasant.

Improved Horsepower

The exhaust wrap kit will help to increase the horsepower of your motorcycle. The wrap will work to trap the heat in the exhaust system, which will then create a higher-pressure environment. This pressure will force more air through the engine, which will result in more power. Additionally, the increased pressure will also help to improve the efficiency of the engine, as it will be able to better utilize the fuel that it burns.

In order to see the best results, it is important to make sure that the exhaust wrap kit is installed properly. If it is not installed correctly, it can actually cause the engine to lose power. 

Additionally, the exhaust wrap will need to be replaced periodically, as it will eventually break down from the heat and wear. However, if you take care of it, the exhaust wrap can last for many years and provide you with a significant increase in horsepower.

Prevents Burns

Another benefit of the exhaust wrap kit is that it prevents burns. If you have ever been unfortunate enough to come in contact with a hot exhaust pipe, you know how painful it can be. The exhaust wrap will help to insulate the pipes, preventing them from getting too hot and causing burns. This is especially beneficial if you frequently ride in cold weather, as the pipes are more likely to get cold and cause burns.

Extends Component Life

The final benefit of the exhaust wrap kit is that it extends the life of your components. By trapping heat inside the pipes, it prevents it from damaging sensitive components. Additionally, the increased pressure created by the wrapped pipes will help to improve the efficiency of the engine, which will reduce wear and tear on the components. The extended life of your components will save you money in the long run, as you will not have to replace them as often.

Aesthetic Improvements

In addition to the functional benefits, the exhaust wrap kit also provides aesthetic improvements. The black colour of the wrap will give your bike a more aggressive look, and the wrapped pipes will add a touch of style. Additionally, the kit can be used to cover up damaged or rusty pipes, which can improve the overall appearance of your bike.

The Cons

Smoking Exhausts

One of the potential drawbacks of using exhaust wraps is that they can cause the engine to smoke. This is because the wrapped pipes will create a higher-pressure environment, which can force oil and other fluids into the combustion chamber.

These fluids will then be burned along with the fuel, creating a blue or white smoke. While this smoke is not harmful to your bike or yourself, it can be annoying and unpleasant.

If you notice that your engine is smoking after installing the exhaust wrap kit, you can try adjusting the tension of the wrap. This will help to reduce the amount of pressure on the pipes, and may help to reduce or eliminate the smoking problem. Additionally, you can try installing a heat shield between the exhaust pipe and the engine.

Rusting

Another potential drawback of using exhaust wraps is that they can cause the pipes to rust. This is because the wrapped pipes will trap moisture inside, which can then lead to rusting. Additionally, the increased pressure created by the wrap will also promote the formation of rust.

If you notice that your pipes are starting to rust, you can try coating them with a high-quality Rust Inhibitor. This will help to protect the metal from corrosion and extend the life of your exhaust system. Additionally, you can try installing a heat shield between the exhaust pipe and the engine.

Higher Engine Temperatures

One final potential drawback of using an exhaust wrap kit is that it can cause the engine to run hotter than usual. This is because the wrapped pipes will trap heat inside, which can then be transferred to the engine. Additionally, the increased pressure created by the wrap will also promote the formation of rust.

If you notice that your engine is running hotter than usual, you can try adjusting the tension of the wrap. This will help to reduce the amount of pressure on the pipes, and may help to reduce or eliminate the problem. Additionally, you can try installing a heat shield between the exhaust pipe and the engine.

How To Install Exhaust Wraps On Your Motorcycle

We’re going to show you how to install exhaust wrap on your motorcycle in just a few simple steps. This will help keep your motorcycle’s noise level down and also protect you from heat exposure.

First, you’ll need to purchase some exhaust wrap. You can find this at most auto parts stores or online. Make sure you get the correct size for your motorcycle.

Next, clean the area where you’ll be wrapping the exhaust pipe with soapy water. This will help the adhesive on the wrap stick better.

Now, start at the front of the exhaust pipe and begin wrapping it tightly around the pipe. Overlap each layer by about half an inch. Continue wrapping until you reach the end of the pipe.

Now, take a piece of duct tape and wrap it around the end of the exhaust pipe to secure the wrap in place. That’s it! You’ve now installed your own exhaust wrap and can enjoy a quieter and cooler motorcycle ride.

Author
Higgins Cooper1

Hi, I'm Hugo, I'm a motorcycle enthusiast who’s been riding for the last 10 years. I'm passionate about all things motorcycles and started Bikes Future to help other riders make the right motorcycle moves. I ride a white Kawasaki Ninja 400, and enjoy adventure riding on country roads when I get the chance.